Taste The Code How to Connect Modbus RS485 Wind Speed Sensor to Arduino Posted: May 12, 2025 | Last updated: May 12, 2025 Hi, I'm Bill. I'm a software developer with a passion for making and ...

The board, in the organisation’s ‘shield’ format, includes an RS485 interface. “By incorporating RS485 connectivity, the Arduino Uno SPE Shield becomes a tool for upgrading RS485 legacy systems or ...

On-board jumpers allow the transmitter and receiver to be connected to a choice of Arduino I/O pins – default is Tx is connected to UART Serial pin 1 and Rx to UART Serial pin 0. The associated ...

Waveshare ESP32-S3-Touch-LCD-7 is an ESP32-S3 powered WiFi 4 and Bluetooth 5 LE 7-inch touchscreen display with plenty of expansion interfaces such as RS485, CAN Bus, I2C, UART, and Analog ... with ...

Bonezegei RS485 is an Arduino library that enables the use of RS485 to UART converter modules based on the MAX485 chip. The library allows bidirectional communication between RS485 and UART devices, ...

To test the functionality I wrote simple YAML configuration which in two second intervals sends specific 8 byte sequence to the RS485 ... Arduino code which accomplishes same thing and it works as ...

A GPS unit and a Bluetooth-to-serial were tying up all the hardware UARTs on an AVR Arduino project ... IDs and assigns each a virtual serial port. While this was a hack born of necessity ...

microSD card socket Industrial control interfaces CAN bus via 3-pin terminal block RS485 via 3-pin terminal block Expansion – Unpopulated 12-pin header with 8 GPIOs configurable as UART, SPI, I2C, ...

In a recent post we interfaced a small DMX RGB LED Par Light with an Arduino Uno through a MAX485 module. In this post we will learn how to work with a compact USB to RS-485 Converter Module. This ...