Should you stick with the venerable Apple Studio Display or switch to the newer Asus PA32UCDM? Our extensive testing lets us ...

In addition to featuring a larger display, the MicroPC 2 has an Intel N250 Alder Lake-N processor. While that’s very much a budget chip designed for cheap, low-power computers, it should bring a ...

Plug the RFID module into the breadboard with enough space around it. Connect the VCC pin to the Arduino's 3.3V (not 5V), and ...

They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor. A typical I2C LCD display consists of an HD44780-based character LCD display and an ...

Waveshare “ESP32-S3-Touch-LCD-4.3B” is a capacitive touch display development board built around an ESP32-S3 SoC with RS485, CAN Bus, I2C, and isolated DIO interfaces provided through a terminal block ...

Waveshare ESP32-S3-Touch-LCD-7 is an ESP32-S3 powered WiFi 4 and Bluetooth 5 LE 7-inch touchscreen display with plenty of expansion interfaces such as RS485, CAN Bus, I2C, UART, and Analog input that ...

This Arduino project is designed to utilize a DS3231 RTC module and Liquid Crystal I2C to display the time and temperature. A push button is required to manually turn on and off the LCD. There are two ...

Given that it’s set on an LCD screen, it’s not going to look perfect, but it is an interesting new approach to the LCD problem. TCL CSOT does note, however, that consumers will have to wait ...

The display is a 1.14 inch TFT LCD screen. Its keyboard is designed for ... There’s also a HY2.0-4P interface for adding I2c sensors including temperature, humidity, light, or pressure sensors.